Powder mortar equipment is mainly used in the construction industry. What are the specific precautions when using it?
1. Before starting the dry mortar equipment, we must pay attention to the following: first open the observation port, discharge port, feed port, etc. of each device to observe whether there are any residues and debris. If there are, they must be strictly cleaned before starting the machine. During the work process, it is strictly forbidden to put hands, hard objects and debris into the equipment.
2. To extend the life of the motor of the equipment, the power supply of the equipment must be grounded during work. After turning on the equipment, it is necessary to idle the hot engine for 5-10 minutes. No abnormal phenomenon is found in the hot engine before production and use.
3. In order to ensure the life safety of the users during the production process, the control switches of each device must be treated with leakage prevention.
4. Non-professionals are strictly prohibited from inspecting, repairing and debugging the equipment.
5. After starting the equipment, be sure to pay attention to the working direction of the equipment and whether it is consistent with the specified direction, otherwise it will cause damage to the equipment.
6. After the equipment is put into use, it must be strictly maintained regularly to improve the working efficiency and service life of the equipment.
7. The equipment must be installed in a place that is easy to ventilate and dry, and the surrounding environment must be kept clean and sanitary.
8. Regularly check the tightness of the transmission belt and the screws at the connection parts, and make appropriate adjustments.
9. The whole set of equipment is an intermittent mixing and stirring equipment. Note that the single workload cannot exceed the specified amount of the equipment.
10. The equipment strictly complies with the empty machine start.
